Network path not found in XP SP3 - possible solutions.
Fix:
- Turn off firewall
- Checking service: Computer browser, Server and Workstation
- Install Client for Microsoft Networks on your network adapter
| I) | Make sure the service "Computer Browser" is running on your Domain Controller, and only on your DC:* On the DC open up Services, under Administrative Tools in the Start Menu. * Scroll down to the Computer Browser service. * If it is Disabled or set to Manual, set it to Automatic. * Then start it. It may stop immediately again, but this is OK. * Check the XP machine in question to make sure this service is disabled * Other computers on the network could have this service enabled, look for error messages indicating which ones | |
|---|---|---|
| II) | Enable NetBIOS over TCP/IP* open up Network Connections, under Control Panel. * Right click on your network adapter and click on Properties. * Click on Internet Protocol (TCP/IP), then click on Properties. * Click on Advanced, and click on the WINS tab. * Even if it is set to Default, set the radio button to Enable NetBIOS over TCP/IP. * Press OK on each screen until everything’s closed. * Go back to the client machine and try again. * You should be able to connect! | |
| III) | Stop Routing and Remote Access service* Go back to the Services window and find the service named Routing and Remote Access. * Double-click on it, set it to Manual, and stop it. * Close Services and try to connect from your client machine again. |
Post a Comment